Intel Solid-State Drive Toolbox version 3.2.1
Written by . Posted in INTEL SSD
Supported Intel SSD drive:
Intel® Solid-State Drive 310 Series -- 2CV102M3
Intel® Solid-State Drive 311 Series -- 2CV102M5
Intel® Solid-State Drive 320 Series -- 4PC10362
Intel® Solid-State Drive 330 Series -- 300i
Intel® Solid-State Drive 335 Series -- 335u
Intel® Solid-State Drive 510 Series -- PPG2 or PPG4 (120GB SSD)
Intel® Solid-State Drive 510 Series -- PWG2 or PWG4 (250GB SSD
Intel® Solid-State Drive 520 Series -- 400i
Intel® Solid-State Drive 530 Series -- DC32
Intel® Solid-State Drive 710 Series -- 6PB10362
Intel® X18-M / X25-M SATA SSDs (34nm) -- 2CV102M3
Intel® X18-M / X25-M SATA SSDs (50nm) -- 8820
Intel® X25-E SATA SSDs -- 8850
Intel® X25-V SATA SSD -- 2CV102M3
Intel® Solid-State Drive DC S3500 -- 0355
Intel® Solid-State Drive DC S3700 -- 0265
New in this release of the Intel:
SSD Toolbox includes firmware updates for both Intel
SSD DC S3700 and S3500 products with the following changes:
• In the unlikely event that a drive fails, the drive will now report the correct serial number and actual capacity. The error code is available in ID block word 140 and GPL address 0xDD
• When a power-off is less than 500ms the drive will automatically reset and allow proper drive enumeration
• Support for both 512B and 4KB physical sector size
• As blocks are retired, the SMART E8h value will decrease linearly
• After a power cycle, timed workload variables will resume from the last saved values and update after 60 minutes and every minute thereafter
• SMART Attribute 05h now has a normalized value of 100
• SMART Attribute C2h now reports the correct temperature
Download SSD Toolbox version 3.2.1 from Intel
Firmware Release Notes
Firmware Update Tool Guidelines
Firmware Update Tool v2.0.9 (ISO-Date)